Diffusive partitioning tracer test for nonaqueous phase liquid (NAPL) detection in the vadose zone

This paper proposes the theory and practical application of a new partitioning tracer test for nonaqueous phase liquid (NAPL) detection in the vadose zone, which is based on diffusion. A mixture of chlorofluorocarbons as gaseous tracers is injected into the vadose zone to form a point source at the injection point. While the tracers diffuse away, small volumes of gas are withdrawn from the injection point. The quantitative determination of the NAPL saturation is based on a comparison of the concentration decline of tracers with different air-NAPL partitioning coefficients. The test has been evaluated in laboratory sand columns contaminated with dodecane. NAPL in saturations of 0.8-4% of the total porosity have been quantified in a wide range of different water contents. Actual and measured NAPL saturations calculated as an average from four different tracer pairs agreed within +/-30%. The new method was successfully used for repeated NAPL quantification in a large-scale field lysimeter contaminated with artificial kerosene. This rapid and inexpensive test is potentially of value for site investigations especially in combination with soil gas measurements, because it requires similar equipment. Possible applications are source delineation and repeated NAPL quantification in situ during a remediation.