Related Experiment Video
Updated: Dec 29, 2025

Studying Large Amplitude Oscillatory Shear Response of Soft Materials
Published on: April 25, 2019
Experimental study of vibrational behavior of laminated annular disks
1Department of Mechanical Engineering, TaiZhou Polytechnical College, JiangSu, People's Republic of China.
Abstract:
The purpose of this paper is to present an experimental study of the vibrational behavior of laminated annular disks, and effects of laminations on the vibrations of the disks. The vibrations of a series of solid annular disks were calculated using the finite-element method in order to provide a basis for comparison with experimental data. An extensive range of experiments was performed on both a series of solid disks and a series of laminated disks under a range of normal clamping pressures. Based on the calculated and experimental results, it was found that the vibrational behavior of the laminated disks was dominated by that of the individual disk, of which the laminated disks were composed. Laminations had great effects on the vibrational behavior of the laminated disks and the effects depended upon the mode type, the clamping pressure, and the number of disk assembly. Laminations increased damping and reduced the amplitude of frequency response function for both the transverse modes and in-plane modes of disks. The resonant frequency of transverse modes shifted higher because of the effects of laminations. For the in-plane vibrational modes, the effects on the resonant frequency could be neglected and the resonant frequency could be considered to be a constant.
More Related Videos
Related Concept Videos
Residual Stresses in Circular Shafts
Thin-Walled Hollow Shafts
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular velocity...
Stress Concentrations in Circular Shafts
Steady, Laminar Flow Between Parallel Plates
Bending and Torsional Moments
The reaction developed in a structural element when subjected to an external force causes the element to bend. When a structural element bends upwards, it creates compressive normal forces on the top and tensile normal forces on the bottom, resulting in a couple that determines the bending...

