CardioClasp: a new passive device to reshape cardiac enlargement

In dilated heart failure, geometric distortions place an extra load on the myocardial cells. If this extra burden can be eliminated, the myocardial wall stress would decrease leading to improved systolic ventricular performance. In a dilated heart failure model, we wanted to see whether the CardioClasp (which uses two indenting bars to reshape the left ventricle [LV] as two widely communicating "lobes" of reduced radius) could improve systolic performance by passively reshaping the LV and reducing the wall stress. In mongrel dogs (n = 7; 25-27 kg), rapid ventricular pacing (210 ppm 1st week to 240 ppm 4th week) induced dilated heart failure. After 4 weeks, LV performance was evaluated at baseline and with the CardioClasp by measuring LV end-diastolic and peak LV systolic pressure, LV +dP/dt, LV -dP/ dt, and cardiac output. With the Clasp on, LV wall stress was reduced to 58.6+/-3.5 from 108.3+/-8.2 g/cm2. The fractional area of contraction (FAC) with the Clasp on (28.4+/-4.4) was significantly increased (p < 0.05) from baseline (20.8+/-4.6) and consistent with improved systolic performance. Cardiac output, LV peak systolic and end-diastolic pressures, and regional myocardial blood flow were unaltered. The Clasp was able to acutely reshape the left ventricle, while preserving the contractile mass, and reduced the tension on the myocardial cells and increased the fractional area of contraction without decreasing the systolic blood pressure.