Brick production with dredged harbour sediments. An industrial-scale experiment

A volume of 600.000 m3 harbour sediments is annually dredged out of the harbour basin of Bremen to maintain a certain water depth. Because of its perpetual availability, homogeneity and mineralogical, petrographic and chemical composition, the sediment is regarded as a suitable raw material for brick production. A pilot experiment was conducted at a full-scale industrial brickworks. During production, the environmental standards concerning waste-water treatment and the quality of exhausted gas were sufficiently fulfilled. Bricks specified as "building bricks" were produced according to German industrial standards. The parameters pH-value and grain size were varied in leaching tests performed on the bricks as both parameters are likely to change in the course of the brick's life cycle. The leaching data showed that As was stabilised and heavy metals were immobilised in a way that the bricks were not (hazardous to soil or groundwater) neither by their use, for example, in masonry, nor afterwards, when they will be deposited as mineral demolition mass.