Related Experiment Video
Updated: Sep 30, 2026

A Novel Inhalation Mask System to Deliver High Concentrations of Nitric Oxide Gas in Spontaneously Breathing Subjects
Published on: May 4, 2021
Delivery characteristics of a combined nitric oxide nasal continuous positive airway pressure system
R Lindwall1, C G Frostell, P A Lönnqvist
1Department of Anaesthesia, Karolinska Institutet Danderyd Hospital, Stockholm, Sweden. robert.lindwall@ane.ds.sll.se
Background:
Nitric oxide (NO), when inhaled, has a synergistic effect with airway recruitment strategies such as positive endexpiratory pressure (PEEP) or continuous positive airway pressure (CPAP) in improving oxygenation in lung injury.
Methods:
We modified a commercially available nasal CPAP (nCPAP) system to enable the concomitant delivery of inhaled NO (iNO) and nCPAP to neonates and term babies. Oxygen, NO and nitrogen dioxide (NO2) concentrations were measured, comparing the effects of using 50 or 1000 parts per million (p.p.m.) NO stock gas cylinders.
Results:
Stable and accurate delivery of iNO was found for both stock gas concentrations. Using a 50 p.p.m. NO stock gas resulted in limited NO2 formation, with a maximum inspired NO2 concentration of < or = 0.3 p.p.m. (dose range up to 37 p.p.m. iNO), which was interpreted as the result of progressive dilution with nitrogen. In contrast, using a 1000 p.p.m. NO stock gas cylinder, inspired NO2 levels increased nonlinearly as expected with an increasing inspired concentration of NO.
Conclusions:
Inhaled NO can be safely and reliably delivered by the system we describe. The NO2 levels generated by the system are low, at least up to a dose of 37 p.p.m. NO, regardless of a stock gas concentration of 50 or 1000 p.p.m. NO. Using a 50 p.p.m. NO stock gas concentration, up to 80% oxygen can be given at 10 p.p.m. iNO.
More Related Videos
15:04Modeling and Simulations of Olfactory Drug Delivery with Passive and Active Controls of Nasally Inhaled Pharmaceutical Aerosols
Published on: May 20, 2016
07:28Dry Powder and Nebulized Aerosol Inhalation of Pharmaceuticals Delivered to Mice Using a Nose-only Exposure System
Published on: April 6, 2017
Related Concept Videos
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Administering Oxygen by Nasal Cannula
Nasal Cannulas
A nasal cannula is a lightweight tube split into two prongs placed in the nostrils, connected...
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Suctioning the Nasopharyngeal Airway
Equipment Required
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...