Removal of nitroaromatics from synthetic wastewater using two-step zero-valent iron reduction and
Ramkrishna Mantha1, Nihar Biswas, Keith E Taylor
1Department of Civil and Environmental Engineering, University of Windsor, ON.
Abstract:
Degradation of nitroaromatics, which are significant environmental pollutants, is difficult to achieve. Zero-valent iron reduction of nitroaromatics coupled with peroxidase-catalyzed capture of the resulting anilines as a two-step strategy for removing nitroaromatics from wastewater and process water is investigated here. The concentration range of nitroaromatics studied was that which would be present in industrial wastewater streams. Studies were done in continuous-flow columns. The enzymatic treatment following zero-valent iron reduction was carried out in a plug-flow reactor using a crude preparation of the enzyme soybean peroxidase extracted from soybean hulls. The complete reaction time for the two steps was 5 to 5.5 hours. Operating parameters including pH, peroxide/substrate ratio, enzyme concentration, and alum concentration were optimized. Optimum conditions obtained were approximately neutral pH with a hydrogen peroxide/substrate molar ratio of 1.5 for all of the nitroaromatics tested. Alum concentrations between 50 and 100 mg/L were useful in removing the apparent color from the treated water.
Related Concept Videos
Oxidation of Phenols to Quinones
o-hydroxy phenols are oxidized to o-quinones and p-hydroxy phenols to p-quinones. Such redox reactions involve the transfer of two electrons and two protons. The reversible redox property is crucial in...
Preparation of Amines: Reduction of Oximes and Nitro Compounds
Though catalytic hydrogenation can reduce nitrobenzenes, the reduction is nonselective in the presence of other functional groups. For instance, if nitrobenzene contains an aldehyde group,...
Radical Formation: Elimination
Phase I Reactions: Reductive Reactions
Microbial Wastewater Treatment
Biological Treatment of Effluent and Waste Water


