Differences in microbial biomass, organic carbon, and dye sorption between flow and no-flow regions of unsaturated...

Transport models in which the liquid phase is partitioned between conducting and nonconducting regions allow the possibility that degradation and sorption are different in these regions. However, there is little information on biological or chemical differences between conducting and nonconducting regions of the soil matrix. Previous work by the authors on Br transport through unsaturated, intact soil cores of Dundee silty clay loam (fine-silty, mixed, active, thermic Typic Endoaqualf) indicated non-equilibrium conditions that could be well-described by a two-region model. Fitted parameters indicated little solute transfer between flow regions, suggesting that dye movement in unsaturated soil might delineate conducting and nonconducting regions of this soil. Steady-state, unsaturated flow was established in intact cores (10 by 30 cm) of the Dundee soil, then Br and erioglaucine dye were displaced through these cores. The soil cores were then sectioned into 5-cm segments and stained soil was separated from unstained soil. Microbial biomass C, organic C, and dye sorption K(D) (= g(sorbed) kg(-1)soil/g L(-1)) values for stained and unstained soil were determined. Stained soil had higher microbial biomass C but generally lower organic C and lower affinity for dye sorption than unstained soil from the same depth increment. Fraction of immobile water, dispersion, and mass transfer between conducting and nonconducting regions were consistent with previous results.