Characterization of hard metal dusts from sintering and detonation coating processes and comparative hydroxyl radical...

Dust samples from sintering and detonation coating hard-metal processes were characterized, compared, and contrasted for morphology, composition, and generation of hydroxyl radicals. Inhalation of respirable hard-metal (sintered carbide) dusts from hard-metal processes is known to cause fibrotic and asthmatic lung disease. Scanning electron microscopy/energy-dispersive X-ray analysis was used for morphology, composition, and elemental distribution. An electron spin resonance (ESR) spin trapping technique was used to detect hydroxyl radical generation. Samples were incubated with air-saturated buffer solutions containing a spin trap and analyzed by ESR for the presence of *OH in solution. Postdetonation coating samples often had surface contamination of Co on the WC particles, as shown by elemental mapping of individual particles; this was not evident in predetonation samples or unsintered materials in this study. ESR measurements show that both detonation-gun materials were capable of generating *OH , while the WC, cobalt, and presintered mixture did not produce detectable amounts of *OH radicals. The DMPO/*OH adduct formation was apparently facilitated by Fe-mediated reactions for predetonation dusts, and by Fe-mediated site-specific reactions for postdetonation dusts. The overspray materials from the detonation-gun process produced 9-fold more *OH radicals than the predetonation coating mixture. Overall, this study indicates there are substantial differences between postdetonation materials and both predetonation and unsintered hard-metal process materials with respect to morphology, elemental distribution, and *OH radical generation reactions and that these differences may be important in the toxic potential of those materials.