A comparative analysis based on different strength criteria for evaluation of risk factor for dental implants

A numerical analysis is developed to study the interaction phenomena between endousseus titanium dental implants and surrounding jawbone tissue. The interest is focused on the most appropriate evaluation of the stress state arising in the tissue because of the implant under physiological loading. The problem is considered with regard to linear elastic response of the one and to short time effect. Different configurations of bone-implant system are described, using axial-symmetrical and three-dimensional models, by means of finite and geometric element method. The investigation attains to the stress states induced in bone that lead to a limit condition near the effective failure surface. The parameter commonly adopted in literature, such as the Von Mises stress, represents an excessive simplification of problem formulation, leading to an incorrect evaluation of the real failure risk for the implant, due to the assumption of the isotropic and deviatoric nature of the adopted stress measure. More suitable criterion can be assumed, such as the Tsai-Wu criterion, to take into account the anisotropy that characterises the response of bone, as well as the influence of a hydrostatic stress state. The analysis developed offers a comparison of results by using different criteria, leading to an evaluation of reliability of the procedure to be followed and addressing also to an evaluation of a risk factor for the implant investigated.