Related Experiment Video
Updated: Sep 29, 2026

Simulation of a Scaled Assembly Process with Collaboration of a Robotic Arm and Monitoring through a Vision System for Quality Control
Published on: August 29, 2025
Evaluation of commutability of control materials
Emmanuel Brion1, Jean-Marc Lessinger, Nicholas Gould
1Laboratoire de Biochimie appliquée, UFR des Sciences Pharmaceutiques, Université Louis Pasteur de Strasbourg, Ilkirch, France.
Abstract:
The commutability of 13 control materials was evaluated by performing parallel measurements on two different analysers: a Synchron CX-5 Delta from Beckman-Coulter and a Vitros 950 from Ortho-Clinical Diagnostics. Twenty three clinical chemistry analytes (substrates, electrolytes and enzymatic activities) were determined in plasma from 15 different patients in order to define intermethod relationship for each analyte. The relationship observed for each control material was compared to those obtained for patients' specimens. The results show that commutability depends both on the tested analyte and on the control material. No totally commutable material has been found for the whole set of tested parameters. Most control materials were commutable for inorganic phosphate, glucose, chloride, triglycerides, alanine aminotransferase, amylase and y-glutamyltransfera-se, but less than a quarter of control materials were commutable for sodium, calcium, creatinine, alkaline phosphatase and lipase. Seven materials were commutable for more than half of the analytes, whereas five control materials were commutable for less than a quarter of these analytes. We propose to verify the commutability of materials before their use in an external quality control assessement.
Related Concept Videos
Quality Control
Quality control helps track data, visualize trends, and identify variations, making it easier to detect deviations that may affect the accuracy of an analysis. One way to do this is by generating a quality control chart, which...
Control Systems
At the heart...
Controlled-Current Coulometry: Overview
Workability of Concrete
Concrete's workability is determined by its resistance to internal forces that arise when...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller aligns...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal and...

