Metal powder substrate-assisted laser desorption/ionization mass spectrometry for polyethylene analysis

Polyethylene is one of the most important industrial polymers and is also one of the most challenging polymers to be characterized by mass spectrometry. We have developed a substrate-assisted laser desorption/ionization (LDI) mass spectrometric method for polyethylene analysis. In this method, cobalt, copper, nickel, or iron metal powders are used as a sample substrate and silver nitrate is used as the cationization reagent. Using a conventional UV LDI time-of-flight mass spectrometer, intact oligomer ions having masses up to 5000 u can be detected. Cobalt is found to produce spectra with the highest signal-to-noise ratio and the lowest level of fragmentation. Cobalt powder size is shown to have some effect on the spectra produced. The best results are obtained with the use of cobalt powders with diameters ranging from 30 to 100 microm. Fragmentation cannot be totally eliminated, but the fragment ion peaks can be readily discerned from the intact polyethylene ions in the substrate-assisted LDI spectrum. Thus, the average molecular masses of low-mass polyethylene samples can be determined by using this method. A rapid heating model is used to account for the effectiveness of using the coarse metal powders to assist the analysis of intact polyethylene molecules by LDI.