Occupational exposures to high frequency electromagnetic fields in the intermediate range ( >300 Hz-10 MHz)

The aim of this study was to identify work situations with electromagnetic fields of 300 Hz-10 MHz and to characterize the occupational exposure. Work place investigations included descriptions of the work environment and physical measurements. We estimated electric (E) and magnetic (H) fields by spot measurements in air, by logged exposure data, and when possible, we recorded induced currents in limbs. The instruments used were Wandel and Golterman EFA-3, NARDA 8718, Holaday HI-3702. The exposure sources comprised five induction furnaces, seven induction heaters, one surface treatment equipment, four units of electronic article surveillance (EAS), and medical devices for surgery and muscle stimulation. The induction furnaces operated at 480 Hz-7 kHz, and the maximum values of logged data varied between 512-2,093 V/m (E field) and 10.5-87.3 A/m (H field). The induction heaters (3.8 kHz-1.25 MHz) also showed high maximum exposure values of both E and H fields. Three EAS units, an electromagnetic plate at a library, a luggage control unit, and an antitheft gate, showed E fields reaching 658-1,069 V/m. The H fields were comparatively lower, except for the antitheft gate (5 and 7.5 kHz) showing a maximum value of 27.2 A/m (recorded during repair). Induced currents of 5-13 mA were measured for the medical devices. The study improves the basis for an exposure assessment for epidemiological studies of long term effects of exposures to high frequency electromagnetic fields.