Improved approaches to ecotoxicity testing of petroleum products

Crude oils produced in the North West shelf of Western Australia are highly volatile, a characteristic not shared by most of the Northern Hemisphere crude oils on which internationally accepted toxicity test protocols were developed. Because of this volatility and some other factors, the LC50 and EC50 values obtained from acute toxicity tests will be significantly affected by the changes of toxicant concentration in test solutions during the period of exposure. To address these issues all steps of a standard protocol for crude oil toxicity testing have been revised. A systematic study has been performed on factors which affect petroleum hydrocarbon solubilisation in aqueous systems during test solution preparations. The influence of mixing time, agitation energy and volume/ interface ratio on a hydrocarbon concentration in a water-soluble fraction (WSF) was studied for heavy, medium and light crude oils. A study of the sensitivity of marine unicellular algae to WSF of crude oils was conducted with Isochrysis sp., Nannochloropsis-like sp. and Nitzchia closterium. Total concentrations of hydrocarbons dissolved in test solutions were estimated by UV-spectrometry and GC/FID chemical analyses. When the toxicant concentration decreased during the exposure period, the EC50 values derived from initial or final concentrations either underestimate or overestimate toxicity, respectively. Therefore, weighted average concentrations (WAC) calculated for the whole test period were recommended for expressing hydrocarbon concentrations in test solutions of crude oils. Toxicity indices calculated from WAC of total hydrocarbons for different crude oils can be compared regardless of the rates of hydrocarbon loss.