Human response to buffeting in an all-terrain vehicle
Related Experiment Video
Updated: Oct 13, 2026

Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior
Published on: April 13, 2016
Abstract:
Suitably prepared subjects were exposed to the vibration imposed by driving a personal-type all-terrain vehicle over a heavily plowed track. Acceleration was measured in the Z-axis at the seat of the vehicle, and in the X, Y, and Z axes at the hip and head of the subjects. Acceleration peaks, rates of onset, durations, and frequency ranges were determined and a spectral analysis conducted. Results showed that, for this vehicle under the test circumstances, the subjects respond with a low-frequency (less than 4 Hz) oscillation at approximately 0.5 Gz above nominal, on which are imposed numerous peaks of 1 to 5 G, or higher with rates of onset within the range measured, of 20 to 100 G/s. Although the measurement system did not conform to ISO (International Standards Organization) requirements, the results suggest that continued exposure would exceed the ISO 1-min limit for "health and safety."
Related Concept Videos
Robbers Cave
Rolling Resistance
For instance, imagine a hard cylinder rolling on a comparatively soft surface. The cylinder's weight compresses the surface beneath it. As the cylinder moves, the material in front of it slows down due to...
Rolling Resistance: Problem Solving
Equilibrium and Balance
Impact: Problem Solving
By designating the launch point as the origin and utilizing kinematic equations, the vertical component of the projectile's velocity at the point of impact is...
Response Surface Methodology
The process of RSM involves several key steps:

