Chemistry of trace elements in coalbed methane product water

Extraction of methane (natural gas) from coal deposits is facilitated by pumping of aquifer water. Coalbed methane (CBM) product water, produced from pumping ground water, is discharged into associated unlined holding ponds. The objective of this study was to examine the chemistry of trace elements in CBM product water at discharge points and in associated holding ponds across the Powder River Basin, Wyoming. Product water samples from discharge points and associated holding ponds were collected from the Cheyenne River (CHR), Belle Fourche River (BFR), and Little Powder River (LPR) watersheds during the summers of 1999 and 2000. Samples were analyzed for pH, Al (aluminum), As (arsenic), B (boron), Ba (barium), Cr (chromium), Cu (copper), F (fluoride), Fe (iron), Mn (manganese), Mo (molybdenum), Se (selenium), and Zn (zinc). Chemistry of trace element concentrations were modeled with the MINTEQA2 geochemical equilibrium model. Results of this study show that pH of product water for three watersheds increased in holding ponds. For example the pH of CBM product water increased from 7.21 to 8.26 for LPR watershed. Among three watersheds, the CBM product water exhibited relatively less change in trace element concentrations in CHR watershed holding ponds. Concentration of dissolved Al, Fe, As, Se, and F in product water increased in BFR watershed holding ponds. For example, concentration of dissolved Fe increased from 113 to 135 microg/L. Boron, Cu, and Zn concentrations of product water did not change in BFR watershed holding ponds. However, concentration of dissolved Ba, Mn, and Cr in product water decreased in BFR watershed holding ponds. For instance, Ba and Cr concentrations decreased from 445 to 386 microg/L and from 43.6 to 25.1 microg/L, respectively. In the LPR watershed, Al, Fe, As, Se, and F concentrations of product water increased substantially in holding ponds. For example, Fe concentration increased from 192 to 312 microg/L. However, concentration of dissolved Ba, Mn, Cr, and Zn decreased in holding ponds. Geochemical modeling calculations suggested that observed increase of Al and Fe concentrations in holding ponds was due to increase in concentration of Al(OH)(4)(-) and Fe(OH)(4)(-) species in water which were responsible for pH increases. Decreases in Ba, Mn, Cr, and Zn concentrations were attributed to the increase in pH, resulting in precipitates of BaSO(4) (barite), MnCO(3) (rhodochrosite), Cr(OH)(2) (chromium hydroxide), and ZnCO(3) (smithsonite) in pond waters, respectively.