Influence of aquifer properties on phytoremediation effectiveness

Recent research has shown that planting deep-rooted trees, such as poplar, can take up and degrade important ground water pollutants such as trichloroethylene (TCE) as they transpire water from the capillary fringe of shallow contaminated aquifers. The effect of hydrogeologic factors on the minimum plantation area needed to prevent downgradient migration of contaminated ground water is not well known. Accordingly, the objective of this research was to identify the hydrogeologic parameters that control phytoremediation effectiveness. We used a numerical ground water flow model to evaluate the effect that natural variations in hydrogeologic parameters and growing season duration have on the minimum plantation area required for capture. We found that the plantation area that was needed to completely capture a ground water contamination plume was directly proportional to aquifer horizontal hydraulic conductivity, saturated thickness, and ground water gradient. The plantation area needed for capture increased nonlinearly with increasing plume width, aquifer anisotropy, and decreasing growing season duration. The plantation area needed for capture was generally insensitive to aquifer-specific yield and storativity. Steady-state simulations can be used to predict the plantation area needed for capture in many applications. A particularly important finding of this work is that evapotranspiration fluxes through plantations appropriately sized to contain the plume substantially exceeded the ground water flux through the plume itself.