Evaluation of trajectories and contact pressures for the straight nucleus cochlear implant electrode array - a...

A two-dimensional (2D) finite element analysis has been used in this study to model the insertion of the Nucleus electrode array with different stiffness properties in order to evaluate the propensity of damage by visualizing the predicted trajectories and by comparing the buckling stresses and the contact pressures at the tip (and its distribution along the length) of the electrode array. Previous temporal bone studies have shown that damage during insertion of an electrode array around the basal turn of the cochlear spiral could be related to the design and the stiffness properties of the electrode array. However, it is difficult to evaluate different designs of electrode arrays purely by experimental methods as the experimental conditions and their results are difficult to reproduce. Three electrode arrays with different mechanical properties, i.e. uniform stiffness, graded stiffness, and a soft tip have been modelled. Buckling stress and contact pressure at the tip of the electrode array were found to be highest for the arrays with uniform stiffness. The contact pressures at the tip of the electrode array appeared strongly influenced by the stiffness profile and were optimal for graded stiffness. The results indicate the importance of the electrode array design and stiffness properties in minimizing trauma. However, there are a number of limitations in the present 2D evaluation which will require further analysis using a three-dimensional model to obtain definitive results.