Coincidence system for standardization of radionuclides using a 4pi plastic scintillator detector

A coincidence system using a plastic scintillator detector in 4pi geometry has been developed and applied for the standardization of radionuclides. The scintillator shape and dimensions have been optimized for maximum charge particle detection efficiency, while keeping background low and a nearly constant gamma-ray efficiency for different points from the radioactive source. The gamma-ray events were measured with a NaI(Tl) scintillation counter. The electronic system for processing pulses consisted of logic gates and delay modules feeding a time-to-amplitude converter with output to a multichannel analyzer. The alpha detection efficiency measured with 241Am was around 95% and the beta detection efficiency for 60Co was around 67%. Activity measurements of 241Am and 60Co were performed and the results showed good agreement when compared with a conventional coincidence system employing a 4pi proportional counter.