Adsorption characteristics of benzene on biosolid adsorbent

This study selected biosolids from a petrochemical wastewater treatment plant as the raw material. The sludge was immersed in 0 to 5 mol l(-1) of ZnCl2 solutions and pyrolyzed at different temperatures. When the sludge was pyrolyzed for 30 min at temperatures of 400, 500, 600, and 700 degrees C, the corresponding surface area of the biosolid adsorbent was 46, 401, 921, and 727 m2/g, respectively. Pore size analysis indicated that the mesopore (20 to 500 A) contributed more than the macropore and micropore in the sludge pyrolytic residue. When the benzene influent concentration was 800 ppmv, the adsorption capacity ranged from 59 to 164 mg/g for different biosolid adsorbents. A larger BET surface area and smaller average pore diameter yielded a larger benzene adsorption capacity.