Automatic adjustment of chopping-modulated defibrillation pulses to patient transthoracic resistance

Defibrillation of the heart requires a high amplitude short duration current pulse to be passed through large electrodes placed on the patient's chest. The current meets a virtually active resistance, which can vary in the approximate range of 25 to 180 Omega. As the delivered current or energy depends on the resistance, several methods have been developed to reduce or compensate its influence. For example, pre-shock resistance has been measured by a high-frequency current and the current or energy set accordingly; measurements have been made from the initial tilt and the pulse durations adjusted; and pre-shock measurements have been made by a sub-shock pulse to generate an appropriately selected constant current. A method is proposed using high-frequency chopped biphasic pulses, with pulse-width and period modulation of the elementary pulses. Patient resistance is measured with the first elementary pulse and depending on its value a modulated waveform is generated, selected by a micro-controller from a preprogrammed set. Thus the selected energy is accurately delivered to the patient. In addition, this method allows the shaping of a desired mean patient current waveform, maintaining adequate charge balance between the two phases and securing an appropriate time course of the model-derived transmembrane potential.