Modeling signal loss in surficial marine sediments containing occluded gas

The presence of occluded gas in inland lakes, harbor muds, and surficial marine sediments is well documented. Surficial gassy sediments cause underlying beds to be acoustically impenetrable to seismic surveys; therefore, the modeling of signal loss arising from mudline reflection and transmission absorption is of particular interest. The Anderson and Hampton [J. Acoust. Soc. Am. 67, 1890-1903 (1980)] model for attenuation in gassy sediments was evaluated against the physical and acoustical properties of eight laboratory silty clay soils containing different amounts of occluded gas in bubbles of 0.2- to 1.8-mm diameter. The model was shown to give good agreement with measured data over the lower frequencies of bubble resonance and above resonance. It did not agree with measured data at frequencies below resonance, for which the model did not simulate the bulk properties of the gassy soils. The Mackenzie [J. Acoust. Soc. Am. 32, 221-231 (1960)] model for reflection loss was also examined for the gassy soils. The maximum reflection losses of 6 dB, at a grazing angle of 40 degrees, does not wholly support speculation by Levin [Geophysics 27, 35-47 (1962)] of highly reflective pressure-release boundaries arising from substantial reflection and absorption losses in gassy sediments. It was found that mudlines formed from sediments with significant occluded gas may be successfully penetrated, although the substantial absorption loss arising from signal transmission through the sediment prevents penetration of the surficial layers to much beyond a meter in depth.