Related Experiment Video
Updated: Aug 11, 2026
Temperature-programmed Deoxygenation of Acetic Acid on Molybdenum Carbide Catalysts
Published on: February 7, 2017
Application of ammonia intermittent temperature-programmed desorption to evaluate surface acidity of tungsten oxide
M A Alvarez-Merino1, J P Joly, F Carrasco-Marín
1Departamento de Química Inorgánica y Orgánica, Universidad de Jaén, 23071 Jaén, Spain.
Abstract:
Intermittent temperature-programmed desorption of ammonia was used to study the strength and population of surface acid sites of tungsten oxide supported on activated carbon pretreated at 350 and 700 degrees C. Catalysts pretreated at 350 degrees C showed two types of surface acid sites and desorption occurred with free readsorption until a temperature of around 300 degrees C was reached. Pretreatment at 700 degrees C produced three different states of ammonia adsorbed on the catalysts and desorption occurred with free readsorption.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
11:38In situ FTIR Spectroscopy as a Tool for Investigation of Gas/Solid Interaction: Water-Enhanced CO2 Adsorption in UiO-66 Metal-Organic Framework
Published on: February 1, 2020