Related Experiment Video
Updated: Sep 26, 2026

Characterization and Application of Passive Samplers for Monitoring of Pesticides in Water
Published on: August 3, 2016
Analysis of pesticides in water and sediment under different storage conditions using gas chromatography
Merja Lyytikäinen1, Jussi V K Kukkonen, Michael J Lydy
1Department of Biology, University of Joensuu, P. O. Box 111, FIN-80101 Joensuu, Finland.
Abstract:
This paper describes the process of testing a simple low-solvent method for simultaneously extracting five classes of pesticides (triazines, organophosphates, organochlorines, pyrethroids, and carbamates) from reconstituted water and sediment. This method uses techniques available in most laboratories, namely solid phase extraction (SPE) and sonication in combination with gas chromatography. The recoveries of pesticides ranged from 60 to 120% with the exception of carbaryl, dicofol, and methoxychlor that had higher recoveries. Methods were further tested with pond water and soil samples. The recoveries of pesticides from soil were comparable with those from sediments, while in pond water, recoveries of the organochlorines exceeded 100%. A matrix enhancement effect was suspected to be the cause for the observed elevated recoveries. In order to determine time range and conditions in which the samples can be stored without significant losses, recoveries of pesticides in water and sediment were monitored for 28 days. Water samples were most stable when extracted immediately and stored in SPEs in the freezer. These samples remained stable for up to six weeks in the freezer, whereas sediment samples were stored for a month without a significant decrease in pesticide concentrations.
More Related Videos
04:17Analysis of Organochlorine Pesticides in a Soil Sample by a Modified QuEChERS Approach Using Ammonium Formate
Published on: January 20, 2023
05:20Determination of 45 Pesticides in Avocado Varieties by the QuEChERS Method and Gas Chromatography-Tandem Mass Spectrometry
Published on: December 8, 2023
Related Concept Videos
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Gas Chromatography: Types of Detectors-II
Supercritical Fluid Chromatography
SFC utilizes a supercritical fluid mobile phase,...
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...