Performance assessment model development and analysis of radionuclide transport in the unsaturated zone, Yucca...

This paper describes the development and use of a particle-tracking model to perform radionuclide-transport simulations in the unsaturated zone at Yucca Mountain, Nevada. The goal of the effort was to produce a computational model that can be coupled to the project's calibrated 3D site-scale flow model so that the results of that effort could be incorporated directly into the Total System Performance Assessment (TSPA) analyses. The transport model simulates multiple species (typically 20 or more) with complex time-varying and spatially varying releases from the potential repository. Water-table rise, climate-change scenarios, and decay chains are additional features of the model. A cell-based particle-tracking method was employed that includes a dual-permeability formulation, advection, longitudinal dispersion, matrix diffusion, and colloid-facilitated transport. This paper examines the transport behavior of several key radionuclides through the unsaturated zone using the calibrated 3D unsaturated flow fields. Computational results illustrate the relative importance of fracture flow, matrix diffusion, and lateral diversion on the distribution of travel times from the simulated repository to the water table for various climatic conditions. Results also indicate rapid transport through fractures for a portion of the released mass. Further refinement of the model will address several issues, including conservatism in the transport model, the assignment of parameters in the flow and transport models, and the underlying assumptions used to support the conceptual models of flow and transport in the unsaturated zone at Yucca Mountain.