A technique for cutting brittle undisturbed lateritic soil block samples
Related Experiment Video
Updated: Sep 26, 2026
07:29
Undecalcified Bone Preparation for Histology, Histomorphometry and Fluorochrome Analysis
Published on: January 8, 2010
T Cássia de Brito Galvão1, Vincent P Drnevich, Darrell G Schulze
1Universidade Federal de Minas Gerais, Escola de Engenharìa, Belo Horizonte, Brazil. cassia@etg.ufmg.br
Environmental Monitoring and Assessment
|May 8, 2003
Abstract:
This note describes a technique for cutting undisturbed brittle block samples into smaller specimens for further geotechnical testing. This technique revealed very useful in dealing with collapsible soils, where the sampling is recommended to be done with block soil samples. A further use of this technique as an efficient way for sampling collapsible soils is proposed.
More Related Videos
Related Concept Videos
01:08Brick Cutting Techniques
Brick-cutting techniques involve various tools and methods to shape bricks for construction. A mason's hammer with a chisel-pointed end is used for basic shaping through sharp, precise strikes. For more complex shapes requiring higher precision, a power saw with a water-cooled diamond blade is used.
Cut bricks are categorized by size. Bricks cut to half their original length are called half-bats, while those cut to three-fourths their length are known as three-fourth bats.
Special types of cut...
Cut bricks are categorized by size. Bricks cut to half their original length are called half-bats, while those cut to three-fourths their length are known as three-fourth bats.
Special types of cut...
01:15Quarrying of Stone
Quarrying is the process of extracting stone from a quarry, where specialized techniques are employed to remove large blocks of stone safely and efficiently. This process can involve controlled explosions or more precision-oriented methods such as cutting and drilling.
One common method involves using a diamond belt saw to cut large blocks from the quarry face. These blocks can be about 50 feet long and 12 feet high. After the initial vertical cut, drilling is performed at the base of the block.
One common method involves using a diamond belt saw to cut large blocks from the quarry face. These blocks can be about 50 feet long and 12 feet high. After the initial vertical cut, drilling is performed at the base of the block.