The use of acrylic bone cement for suture anchoring

Healing of tendon or ligament sutured to bone depends among other parameters on the mechanical stability of the suture fixation in or to the bone. The authors propose a method of anchoring suture material using bone cement as a substitute for conventional suture anchors. Conditions for secure fixation of suture material in bone cement were assessed and the technique of anchoring suture material with acrylic cement in bone was developed. Mechanical testing and microcomputed tomography of the suture-cement-bone compound were done. It was found that the suture always should be knotted before embedding it at least 2 mm deep in the bone cement. The holes drilled into the bone in which the sutures are secured with cement should be at least 3.5 mm in diameter and 10 mm deep; in cortical bone a tapped thread is required. Sutures can be secured safely using cement anchors which provide higher pull-out strength of a factor two to five than conventional metallic suture anchors of comparable size. They also adapt to anatomic situations where conventional anchors cannot be used and are more favorable in osteoporotic bone. Cement anchoring of sutures seems to be a cost-effective and valuable alternative when there is poor bone quality or extraordinarily high mechanical load.