Nonlinear interaction of plane ultrasonic waves with an interface between rough surfaces in contact
Related Experiment Video
Updated: Sep 23, 2026

Experiments on Ultrasonic Lubrication Using a Piezoelectrically-assisted Tribometer and Optical Profilometer
Published on: September 28, 2015
1Marcus Wallenberg Laboratory, Department of Aeronautics and Vehicle Engineering, Royal Institute of Technology, 100 44 Stockholm, Sweden. claudio@fkt.kth.se
Abstract:
A theoretical investigation of the nonlinear interaction between an acoustic plane wave and an interface formed by two rough, nonconforming surfaces in partial contact is presented. The macroscopic elastic properties of such a nonlinear interface are derived from micromechanical models accounting for the elastic interaction that is characteristic of spherical bodies in contact. These results are used to formulate set of boundary conditions for the acoustic field, which are to be enforced at the imperfect interface. The scattering problem is solved for plane wave incidence by using a simple perturbation approach and the harmonic balance method. Sample results are presented for arbitrary wave polarization and angle of incidence. The relative magnitude of the nonlinear signals and their potential use toward the nondestructive evaluation of imperfect interfaces are assessed. In particular, attention is drawn to the enhanced nonlinear response of an interface insonified by a shear vertical wave in the neighborhood of the longitudinal critical angle. The motivation for this investigation is provided by the need to develop nondestructive methods to detect and localize small, partially closed cracks in metals with coarse microstructures.
Related Concept Videos
Sound Waves: Interference
Interference and Superposition of Waves
Interference occurs in mechanical waves, such as sound waves, waves on a string, and surface water waves. Mechanical waves correspond to the physical displacement of particles. Hence,...
Propagation of Waves
Consider a scenario where a wave propagates from a string of low linear mass density to a string of high linear mass density. In such a case, the reflected wave is out of phase with respect to the incident wave, however the...
Shock Waves
When the source's speed approaches the speed of sound, constructive interference between successive wavefronts emitted by the source occurs immediately behind it. Initially, scientists believed that this constructive interference would result in such high pressures...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Interference and Diffraction

