Polychlorinated biphenyls removal from weathered municipal solid waste incineration fly ash by collector-assisted...

Polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are highly toxic micropollutants emitted from municipal solid waste incineration (MSWI), in particular, concentrated in the unburned carbon (UC) of MSWI fly ash. Because of concerns over their adverse health effects, a number of countries have classified MSWI fly ash as hazardous material and required further treatment before its final disposal in landfills. The technologies for removing the toxic chlorinated micropollutants in the MSWI fly ash have been studied, however, until now no mature technique has been obtained in this purpose. In this research, we used a technique of collector-assisted column flotation to remove PCBs-enriched UC from MSWI fly ash. We found that 36.9% PCBs could be removed from fresh MSWI fly ash with 61.7% UC removal efficiency, whereas only 21.7% PCBs could be removed from weathered MSWI fly ash with a low UC removal efficiency of 33.7%. By adding a mixture of two kinds of surfactants: sorbitan mono-oleate and polyoxyethylene (20) sorbitan mono-oleate to the weathered fly ash slurry as the collector assistant, 39.3% PCBs was removed at the hydrophile-lipophile balance (HLB) value of 13.5, while the UC removal efficiency increased to 49.0%. The results showed that the collector assistant could enhance PCBs and UC removal efficiencies during the column flotation process, and the mechanism has been discussed in detail. Higher PCBs and UC removal efficiencies could be expected by further optimizing the conditions of collector-assisted column flotation.