Acoustic characteristics of an electrodynamic planar digital loudspeaker

In this paper, an electrodynamic planar loudspeaker driven by a digital signal is experimentally discussed. The digital loudspeaker consists of 22 voice coils, 11 permanent magnets, a diaphragm with streamlined sections molded in plastic, and a suspension made of handmade Japanese paper between the diaphragm and the frame. First, the acoustic responses are affected by the arrangement of the voice coils, so an asymmetric arrangement is studied. This asymmetric arrangement is designed to obtain as flat a frequency response to an analog signal as possible. This arrangement is compared with a symmetric one and results show that the flatness of the frequency response around 1 kHz and 4 kHz is improved and that the sound reproduction band is from 40 Hz to 10 kHz. Second, to evaluate the acoustic responses to a digital signal, the digital loudspeaker is driven with a pulse code modulation signal. Results show that the digital loudspeaker can reproduce pure sound with a total harmonic distortion of less than 5% from 40 Hz to 10 kHz, exceeding this value only in a narrow frequency band near 4 kHz. This digital loudspeaker was demonstrated to have good linearity over its dynamic range of 84 dB.