Automated measurement of lipoprotein(a) by immunoturbidimetric analysis

Immunoturbidimetric analysis of lipoprotein(a) in plasma or serum was developed for use on the Roche COBAS FARA II and COBAS MIRA clinical chemistry analyzers. The components of the assay are: (1) buffer consisting of 2.25% polyethylene glycol in phosphate-buffered saline, 0.2% gelatin, and a surfactant; (2) fractionated goat anti-human lipoprotein(a) IgG; (3) five standards with lipoprotein(a) concentrations ranging from 0.05 to 1.0 g/l; (4) two controls with concentrations of approximately 0.2 and 0.5 g/l. The analyzer delivers sample and buffer, incubates the reaction mixture at 37 degrees C for 5 min, delivers neat lipoprotein(a) antibody, and incubates for an additional 10 min. The lipoprotein(a) concentration of samples is calculated by the COBAS DENS (Data Evaluation for Non-linear Standard Curves) option by fitting the standard curve values to a four-parameter logit-log curve model. Total imprecision results (CV%) for the FARA II and MIRA were under 11% (NCCLS protocol EP5-T). The assay is linear beyond the highest calibrator to 2.6 g/l. No interference was observed for plasminogen up to 2.3 g/l, apolipoprotein B up to 4.36 g/l, hemoglobin up to 10 g/l, bilirubin up to 4.0 g/l, and triglycerides up to 4.36 g/l. Comparison with a double monoclonal ELISA used at the Northwest Lipid Research Laboratories yielded: R = 0.970, slope = 1.013, and y-intercept = 0.00009 (n = 37). Comparison with a commercially available ELISA kit for lipoprotein(a) yielded: r = 0.987, slope = 1.243, and y-intercept = 0.024 (n = 40). This assay provides rapid, accurate, and precise screening of lipoprotein(a) in serum or plasma.