A new instrument for controlling pressure exerted on the sclera during contact Nd:YAG laser cyclodestruction

We tested the device described by Rol et al in their article in this issue, designed to define and precisely control the pressure applied to the sclera during contact cyclodestruction with a cw-Nd:YAG laser. Since scleral transparency, and hence transmission of laser energy, depends on the pressure applied, control of this parameter represents an important advance toward the goal of standardizing the cyclodestructive procedure. In eight of nine cadaver pig eyes, pressure was exerted on the sclera using the pressure-controlling device, with a setting of 0.25 N for two of these eyes, and one of 0.4 N for the other six. In the remaining eye, pressure was controlled intuitively by an experienced surgeon. Applying forces of 0.25 or 0.4 N yielded similar success rates, although these fluctuated greatly even under constant pressure conditions (from 17% to 50% at 0.25 N; from 27% to 42% at 0.4 N). The highest success rate (55%) was achieved by the intuitively controlled pressure irradiations of the experienced surgeon. The variation in coagulation intensity that occurred despite constant pressure suggests that additional factors contribute to the results achieved. Nonetheless, this pressure-controlling probe represents an important achievement. It will permit not only the novice but even experienced operators to adhere unambiguously to a protocol of quantitative, reproducible parameters, and will also help researchers to better understand the relationship between energy delivered and intraocular pressure reduction achieved in contact cyclophotocoagulation.