Related Experiment Video
Updated: Aug 31, 2026

Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation
Published on: August 14, 2020
Application of CFD modelling to study the hydrodynamics of various anaerobic pond configurations
Abstract:
The simulation of hydrodynamics and transport phenomena in waste stabilization ponds is a developing tool worth studying in order to understand their internal processes and interactions. Pond design involves several physical, hydrological, geometric and dynamic variables so as to provide high hydrodynamic efficiency and maximum substrate utilization rates. CFD modelling allows the combination of these factors to predict the behaviour of ponds having different configurations. The two-dimensional depth-integrated model MIKE 21 was used in this study to simulate hydrodynamic and advection-dispersion processes in a full-scale anaerobic pond (AP) located in southwest Colombia. A set of 12 configurations including sludge contents, inlet-outlet positioning, baffling and pond geometry were modelled. Results showed that a crosswise (diagonally opposite) inlet-outlet layout, a length-to-breadth ratio of 2:1, plus provision of two cross baffles at 1/3 L and 2/3 L were the most effective measures to improve overall AP hydrodynamics and dispersion patterns.
Related Concept Videos
Typical Model Studies
Microbial Wastewater Treatment
Rapidly Varying Flow
Design Example: Creating a Hydraulic Model of a Dam Spillway
Modeling and Similitude

