Related Experiment Video
Updated: Aug 30, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Flotation-separation of aluminum from some water samples using powdered marble waste and oleic acid
Shaban el-Sayed Ghazy1, Salem el-Sayed Samra, Abd el-Fattah Mohammed Mahdy
1Chemistry Department, Faculty of Science, Mansoura University, P. O. Box 66, Egypt.
Abstract:
Bench-scale experiments were conducted in the laboratory, aiming to remove aluminum from water. They were based on the use of powdered marble wastes (PMW), which are inexpensive and produced in large quantity, and thus potentially cause environmental problems, as an effective inorganic sorbent and oleic acid (HOL) as surfactant. The main parameters (solution pHs, sorbent, surfactant and aluminum concentrations, shaking time, ionic strength and the presence of foreign ions) that influence the sorptive-flotation process were examined. Good results were obtained under the optimum conditions, for which nearly 100% of aluminum at pH 7 and at room temperature (approximately 25 degrees C) was removed. The procedure was successfully applied to the recovery of aluminum spiked to some natural water samples. Moreover, a sorption and flotation mechanism is suggested.
Related Concept Videos
Coagulation
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Extraction: Advanced Methods
Washing, Drying, and Ignition of Precipitates
Qualitative Analysis
For instance, group IV...
Factors Affecting Solubility
