Post-treatment of UASB effluent in an expanded granular sludge bed reactor type using flocculent sludge

The performance of an EGSB (expanded granular sludge bed) reactor type using flocculent sludge was evaluated for the post-treatment of effluent from UASB reactor treating domestic sewage. A pilot-scale 157.5-L EGSB reactor was monitored during a 331-day period. The original concept of the EGSB reactor was based on granular sludge use and by applying of high upflow liquid velocities (Vup). However, even using flocculent sludge from a UASB full-scale (Mangueira Plant, Recife, Brazil), good mixing conditions and high retention of biomass were achieved. By applying a 4-h hydraulic retention time and Vup values up to 3.75 m/h, effluent chemical oxygen demand concentrations in the EGSB were below 87 mg/L and 55 mg/L, for total and filtered samples, respectively. Total suspended solid (TSS) concentrations in the effluent were below 32 mg/L. Good performance and stable reactor operation during the whole experimental period were observed. Therefore, the EGSB reactor type using flocculent sludge can also be used for post-treatment of very dilute anaerobic effluent from reactors treating domestic sewage.