Related Experiment Video
Updated: Aug 20, 2026

Transformation of Organic Household Leftovers into a Peat Substitute
Published on: July 9, 2019
Conversion of municipal solid wastes to carboxylic acids by thermophilic fermentation
Wen Ning Chan1, Mark T Holtzapple
1Department of Chemical Engineering, Texas A&M University, College Station, TX 77843-3122, USA.
Abstract:
The purpose of this research is to generate carboxylic acids from the biodegradable fraction of municipal solid wastes (MSW) and municipal sewage sludge (MSS) by using a thermophilic (55 degrees C), anaerobic, high-solid fermentation. With terrestrial inocula, the highest total carboxylic acid concentration achieved was 20.5 g/L, the highest conversion obtained was 69%, and the highest acetic acid selectivity was 86.4%. Marine inocula were also used to compare against terrestrial sources. Continuum particle distribution modeling (CPDM) was used to predict the final acid product concentrations and substrate conversions at a wide range of liquid residence times (LRT) and volatile solid loading rates (VSLR). "Maps" showing the product concentration and conversion for various LRT and VSLR were generated from CPDM. The predictions were compared to the experimental results. On average, the difference between the predicted and experimental values were 13% for acid concentration and 10% for conversion. CPDM "maps" show that marine inocula produce higher concentrations than terrestrial inocula.
Related Concept Videos
Preparation of Carboxylic Acids: Overview
Preparation of Carboxylic Acids: Hydrolysis of Nitriles
Microbial Fermentation
Microbes and Methanogenesis
Microbial Bioremediation of Hydrocarbons
Production of Organic Acids

