Related Experiment Video
Updated: Aug 29, 2026

Lab-Scale Model to Evaluate Odor and Gas Concentrations Emitted by Deep Bedded Pack Manure
Published on: July 19, 2018
Prediction of dairy housing construction costs
J M Pereira1, C J Alvarez, M Barrasa
1Department of Agroforestry Engineering, University of Santiago de Compostela, 27002 Lugo, Spain. jpereira@lugo.usc.es
Abstract:
Dairy farms in Galicia and elsewhere in Europe are going through a transition phase to adapt to modern dairy technology, improve labor efficiency, and increase in size and scale. Expanding a dairy herd and building housing for more cows can be very expensive. A poor decision during expansion can result in serious financial difficulties even to the point of making the farm economically unviable. Dairy managers must carefully evaluate existing alternatives and must select an optimal strategy. To aid this decision, a computer spreadsheet application has been developed that predicts the cost per cow and cost per unit of area of alternative designs as functions of the number of cows to be housed. The spreadsheet is, in principle, applicable to a wide variety of designs and to housing for livestock other than dairy cattle. However, the current database allows comparison among six of the dairy housing designs that have been used most widely in Galicia in recent years. From projected financial results of the developed model, it was concluded that differing designs were preferred for different farm circumstances. Preferred designs for farms with 60 to 200 cows were either four rows of facing free stalls or four rows of tail-to-tail free stalls, which have virtually the same costs. Whereas for farms with fewer than 60 cows, the preferred design was two rows of tail-to-tail free stalls, designs with three rows of free stalls were generally more costly per cow. Results of design calculations must be integrated with other farm management considerations in choosing a particular design.
Related Concept Videos
Design Example: Dimensioning of Concrete Masonry Construction
The site engineer has laid out a plan for the storeroom with external dimensions of twelve feet in length and eight feet...
Posttensioned Masonry Walls
Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground cistern.
Cloning of Dolly the Sheep
Thermal Insulation in Masonry Walls
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh.
Mass Concreting
To reduce the risk of such cracking, the concrete mix may incorporate low-heat cement and pozzolans to reduce the temperature rise. Pre-cooled angular aggregates and water-reducing admixtures...

