Assessing wastewater metal toxicity with bacterial bioluminescence in a bench-scale wastewater treatment system

The effectiveness of a previously developed toxicity monitoring method for activated sludge wastewater treatment employing a bioluminescent bacterium (Shk1) was evaluated in batch experiments and a bench-scale activated sludge system exposed to heavy metals (Cu, Zn, Ni, and Cd). Influent wastewater (primary clarifier supernatant) and activated sludge from a municipal wastewater treatment plant were used in both batch experiments and in the bench-scale wastewater treatment system. Shk1 bioluminescence was most sensitive to Cd and Zn, followed by Cu, and then Ni in order of decreasing sensitivity. In contrast, activated sludge specific oxygen uptake rate was most sensitive to Cu, followed by Cd and Zn, and finally Ni. The same pattern of sensitivity was observed in batch and bench-scale evaluations. Batch experiments examining the effect of metal adsorption were performed. The adsorption of metals to activated sludge and reduction in bioavailability due to chelation by soluble organics or by precipitation in wastewater was found to be an important effect in mediating differences in toxicity response between bioluminescence and respirometry. Batch adsorption experiments indicated that the activated sludge adsorption capacity was highest for Cu, followed by Cd, Ni, and then Zn. A simple mathematical model for the soluble metal concentration in the aeration basin and clarifier was developed utilizing metal distribution coefficients determined from the batch adsorption experiments. Model predictions compared well with results from the bench-scale activated sludge experiments.