Related Experiment Video
Updated: Jul 30, 2026

Rejection of Fluorescence Background in Resonance and Spontaneous Raman Microspectroscopy
Published on: May 18, 2011
Gain-flattened fiber Raman amplifiers with nonlinearity-broadened pumps
1Femtosecond Optics Group, Department of Physics, Imperial College London, Prince Consort Road, London SW7 2BW, UK. david.chestnut@imperial.ac.uk
Abstract:
Gain flattening of an E-band (1360-1460-nm) fiber Raman amplifier was achieved by pump spectral broadening to a 16.3-nm linewidth by use of nonlinearity in a 6.2-km standard fiber. With the broadened pump, the characteristic Raman gain ripple was removed and the 3-dB gain bandwidth was increased by 10.6 nm relative to the nonbroadened pump case. The experimental results agreed well with a gain profile simulation. The use of a 100-m holey fiber for pump broadening was also investigated near 1.56 microm for U-band (1625-1675-nm) Raman amplifiers. Much less broadening was observed, which is believed to be a result of less four-wave mixing.
Related Concept Videos
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and the...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...

