Related Experiment Video
Updated: Aug 29, 2026

Estimating Sediment Denitrification Rates Using Cores and N2O Microsensors
Published on: December 6, 2018
Biological nitrification and denitrification of opto-electronic industrial wastewater
1Institute of Environmental Engineering, National Chiao Tung University, No. 75, Poai Street, Hsinchu 300, Chinese Taiwan.
Abstract:
Development and application of biological nutrient removal processes accelerated significantly over the past decade due to more stringent nutrients (nitrogen and phosphorus) discharge limits being imposed on wastewater treatment plants. The opto-electronic industry has developed very fast over the past decade in the world. The wastewater often contains a significant quantity of organic nitrogen compounds and has a ratio of over 95% in organic nitrogen (Org-N) to total nitrogen (T-N). In this study, a 2-stage Anoxic/Aerobic pre-denitrification process was established and the efficiency of wastewater treatment was evaluated. Wastewater from an actual LCD-plant was obtained as the sample for looking into the feasibility of opto-electronic industrial wastewater treatment. Hydraulic retention time (HRT) and mixed liquor recycle rate (MLR) were controlled independently to distinguish between the effects of these two factors. Under suitable HRT and mixed liquor recycle ratio, effluents of NH4-N, NOx-N and COD can fall below 20 mg/l, 30 mg/l and 80 mg/l.
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Microbial Wastewater Treatment
Inorganic Nitrogen Assimilation
Overview of Nitrogen Metabolism
The largest pool of nitrogen available in the terrestrial ecosystem is gaseous nitrogen (N2) from the air, but this nitrogen...
Environmental Applications of Microorganisms
Bioremediation

