Related Experiment Video
Updated: Aug 29, 2026
Corneal Tissue Engineering: An In Vitro Model of the Stromal-nerve Interactions of the Human Cornea
Published on: January 24, 2018
Preparation and hydration control of corneal tissue strips for experimental use
David Borja1, Fabrice Manns, Peggy Lamar
1Biomedical Optics and Laser Laboratory, Department of Biomedical Engineering, University of Miami College of Engineering, 1251 Memorial Drive, Coral Gables, FL 33146, USA.
Purpose:
The purpose of this study was to develop an experimental protocol to maintain corneal tissue strips at normal hydration and avoid swelling or dehydration during experimental studies on corneal biomechanics and thermal stability.
Methods:
The corneal thickness of 9 whole Eye-Bank eyes was brought back to normal values by immersion in a 25% dextran solution for 24 hours. Corneal buttons were then removed and cut into 2 x 6 mm strips. The 9 strips were immersed successively in Dextran solutions at 25%, 22.5%, and 20% concentration at 35 degrees C. The thickness of the immersed strip in solution was measured every 5 minutes for 1 hour using a modified optical comparator.
Results:
The mean final thickness for the nine corneal strips after one hour in 25%, 22.5%, and 20% dextran solution was 508 +/- 38, 563 +/- 56, and 592 +/- 33 microm, respectively. Average swelling in 25%, 22.5%, and 20% dextran solutions was 1.06 +/- 0.03, 1.20 +/- 0.07, and 1.24 +/- 0.07 times the initial thickness, respectively.
Conclusion:
The hydration of corneal tissue strips is maintained at normal values when the strips are immersed in 25% Dextran solution. Corneal strips swell to thicknesses above normal values in solutions with lower molecular weights.
