Related Experiment Video
Updated: Aug 29, 2026

Clean Sampling and Analysis of River and Estuarine Waters for Trace Metal Studies
Published on: July 1, 2016
Critical evaluation of desorption phenomena of heavy metals from natural sediments
Yan Gao1, Amy T Kan, Mason B Tomson
1Department of Civil and Environmental Engineering, Rice University, 6100 South Main Street, MS-519, Houston, Texas 77005-1892, USA.
Abstract:
In natural sediments, the majority of heavy metal ions are generally associated with the solid phase. To become bioavailable, the metal ions must desorb from the solid. Numerous studies of heavy metals in sediments have suggested that sorption and desorption exhibit hysteresis (i.e., the two processes are not reversible), while other studies have suggested that desorption hysteresis does not exist. In this study, sorption/desorption hysteresis of lead (Pb) and cadmium (Cd) was evaluated over the following range of conditions: (i) desorption induced by replacing the supernatant liquid with contaminant-free electrolyte solution; (ii) desorption induced by lowering the solution pH with mineral acid; and (iii) desorption induced by sequestration with EDTA. Given the importance of dissolved organic and inorganic ligands in regulating heavy metal behavior in nature sediments, sorption/desorption experiments were conducted on both untreated and prewashed sediments. Prewashing treatment increases the sorption potential of Cd but not Pb. Desorption hysteresis is observed in both the untreated and the prewashed sediments using the replaced supernatant method, and the desorption hysteresis appears to increase with aging time. Hysteresis is not observed when desorption is initiated by lowering the solution pH. A large fraction of the sorbed heavy metal ions can be easily desorbed by EDTA; between 0.04 and 1.2 mmol/kg Cd and Pb ions are resistant to desorption.
More Related Videos
Related Concept Videos
Extraction: Advanced Methods
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Electrodeposition
Electrodeposition can...
Microbial Leaching
Electrogravimetric Analysis: Overview
To test the completeness of the...
Precipitation and Co-precipitation

