Treatment of the solution extracted from metal contaminated soils by reverse osmosis and chemical precipitation

In this study a process for the remediation of soils contaminated by lead or copper is proposed, consisting of the operations in sequence: soil flushing, membrane treatment, acidification, and metal precipitation. Pb(II) and Cu(II) extraction from a synthetically contaminated soil using a 0.05 M EDTA aqueous solution were investigated in column. The metal removal efficiencies and the final soil metal concentration were 98.2% and 37.96 mg/g respectively for lead and 95.4% and 59.20 mg/kg for copper. The extracted solutions were concentrated through a membrane treatment to reduce the water content up to the 75% and to obtain a permeate metal concentration in compliance with the Italian Environmental Regulation. The recovery of the used EDTA from the retentate solution, with recovery yield of at least 85.4%, was also obtained through acidification. Metal precipitation from the filtered solution was then performed according two different methods, achieving metal removal yield of more than 99.4%.