Related Experiment Video
Updated: Aug 29, 2026

Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
Source of toxicity in storm water: zinc from commonly used paint
Lynn Adams Kszos1, Gail W Morris, Belinda K Konetsky
1Environmental Sciences Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6422, USA. kszosla@ornl.gov
Abstract:
A Department of Energy site in Paducah, Kentucky (USA), stores thousands of cylinders of depleted uranium hexafluoride. Breaches of the cylinders could result in the release of uranium and hydrogen fluoride. Beginning in 1996, a program was begun to paint the cylinders in order to prevent corrosion of the cylinders and the surfaces of the storage yards were converted to concrete. In 1998, storm water from the cylinder storage yards was found to be toxic to Ceriodaphnia, at concentrations exceeding limits in the site's discharge permit. A six-month study was conducted to identify the source of the toxicity in the storm water. Ceriodaphnia toxicity tests with the storm water resulted in 48-h median lethal concentrations (LC50) ranging from 12 to 94%; zinc concentrations in the storm water ranged from 0.08 to 0.54 mg/L. Acute toxicity tests with zinc and linear regression identified that zinc concentrations in the storm water were sufficient to account for the toxicity observed. By tracking the sources to the discharge point, newly painted cylinders were identified as the source of the zinc in the storm water. Rainwater collected directly from the painted cylinders contained up to 13 mg Zn/L. Laboratory and field tests showed that topcoating the cylinders would reduce the amount of zinc in the runoff from the cylinders.
Related Concept Videos
Acid Mine Drainage
Corrosion
Standard Electrode Potentials
Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...
Waterproofing and Anti-Bacterial Admixtures in Concrete
Waterproofing admixtures render concrete hydrophobic,...
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...

