Performance of basaltic dust issued from an asphaltic plant as a flocculant additive for wastewater treatment

The feasibility of using basaltic dust as a flocculant additive or coagulant aid for wastewater treatment was assessed in this research. The experimental study was divided into two stages: 1) physicochemical characterisation of the basaltic dust by applying standardised techniques, and 2) evaluation of this material as flocculant additive for the coagulation-flocculation of wastewater treated for reuse. Coagulation-flocculation experiments were carried out in the laboratory with a mixture of industrial and municipal wastewater samples collected from two points of the final discharge of the Mexico City sewerage system. Aluminium sulphate and lime were used as coagulants and the basaltic dust as flocculant additive, by applying the jar-test technique. The results of the corrosivity, reactivity, explosiveness, toxicity, inflammability and biological risk tests indicated that this material is classified as a non-hazardous waste (according to the Mexican legislation, NOM-052-ECOL-1993). The density, oxide content and particle size values of basaltic dust were similar to those reported for the flocculant additive denominated activated silica. The jar test results showed a positive effect of basaltic dust over the effluent and sludge qualities, to the extent that coagulant doses can be reduced 30% (from 150 mg/L to 110 mg/L of Al2(SO4)3).