Sulfated nanozirconia: an investigation on acid-base properties and n-butane isomerization activity

Hydrated zirconia was synthesized by an organo-inorganic route employing surfactant and was sulfated using aqueous ammonium persulfate, followed by drying at 110 degrees C. The sample thus obtained was calcined at 600 degrees C to obtain sulfated zirconia and was characterized by several physicochemical methods. Crystallite sizes of sulfated zirconia were calculated from X-ray line broadening using the Debye-Scherer equation and were found to be in the range of 25 nm. When pretreated in air, the catalyst was found to exhibit butane isomerization activity at a temperature as low as 35 degrees C under atmospheric pressure. It showed conversion as high as 37% at 100 degrees C under normal pressure when pretreated in air, whereas nitrogen-pretreated catalyst showed zero activity under similar conditions. NH(3) and CO(2) temperature-programmed desorption studies on air- and helium-pretreated samples indicated that the catalyst surface changes appreciably during air pretreatment. Results on butane isomerization in conjunction with TPD studies suggest that zirconium-oxy sites play an important role in butane activation during the reaction.