Determination of the material properties of microstructures by laser based ultrasound

In most applications of MEMS the mechanical properties of the used materials are key parameters for the perfect working of the microsystems. Measuring bulk acoustic waves excited in MEMS structures with ultra-short laser pulses is a powerful method for the accurate and non-destructive evaluation as well as for the characterization of material properties. The pump-probe laser-based acoustic method generates bulk acoustic waves in a thermo-elastic way by absorbing the pump laser pulses. The acoustic waves are partly reflected at any discontinuity of the acoustic impedance. At the surface of the specimen the reflected acoustic pulses cause changes of the optical reflection coefficient, which are measured with the probe laser pulses. Thin membranes are part of numerous microelectromechanical systems (MEMS) like sensors, activators and bulk acoustic wave (BAW) filters for example. The described non-destructive and non-contact method is the right approach for testing such thin and brittle structures like membranes. Results of measurements on freestanding aluminium-silicon nitride multi-layer membranes with total thicknesses in the order of several hundred nanometers are presented and compared with thermo-elastic models and with measurements of the supported case. The measured results are used for the determination of the moduli of the membranes.