Effect of the fluid in the inclusions of cement paste on the ultrasonic velocity

The durability of cement composites significantly depends on the movement of the fluids into the material through the porous system. The aqueous phase contained in the pores can cause irreversible damage from the dimensional stability viewpoint. In this sense, methods for non-destructive characterization of both, the porous structure and water content should be investigated. In this work, the effect of the fluid in the inclusions of the cement paste on the ultrasonic velocity is studied. Firstly, a theoretical analysis based on the micromechanical model, considering the microstructural information of the matrix and the fluid filling the pores, is presented. Some experimental work is made later using cement paste samples, whose porous structure is maintained dry or saturate with water. In both cases, the ultrasonic velocity is measured and compared to the one predicted by the micromechanical model. Using this technique, the ultrasonic velocity can be predicted with errors below 2% in the cases of dry or water saturated cement paste.