A method of improving overall resolution in ultrasonic array imaging using spatio-temporal deconvolution

In this paper a beamforming method for ultrasonic array imaging is presented that performs both spatial and temporal deconvolution based on a minimum mean square error (MMSE) criteria. The presented MMSE receive mode beamformer performs a regularized inversion of the propagation operator for the ultrasonic array system at hand. The MMSE beamformer accounts for the transmit and receive processes, defined in terms of finite array element sizes, transmit focusing laws and electrical transducer characteristics. The MMSE beamformer is compared to the traditional delay-and-sum (DAS) beamformer with respect to both resolution and signal-to-noise ratio. The two algorithms are compared using both simulated and measured data. The simulated data was obtained using ultrasonic field simulations and the measured data was acquired using a linear phased array imaging wire targets in water. The results show that the MMSE beamformer has superior temporal and lateral resolution compared to DAS. It is also shown that the MMSE beamformer can be expressed as a filter bank, which enables parallel processing at high frame rates.