Related Experiment Video
Updated: Jul 30, 2026

Extraction and Characterization of Surfactants from Atmospheric Aerosols
Published on: April 21, 2017
Physico-chemical treatments for the complete removal of non-ionic surfactants from effluents
1Environmental and Water Resources Engineering, Technion-IIT, Technion City, Haifa, 3200, Israel.
Abstract:
Adsorption isotherms for a selection of non-ionic surfactants on activated carbons indicated the effectiveness of the latter in the removal of these pollutants from secondary effluents. The removal efficiencies were found to be improved when the secondary effluent was first flocculated with ferric chloride. This effectively removed some 80% of the non-ionic surfactant in the effluent. Batch adsorption experiments with powdered activated carbon removed 97% of the surfactant at low carbon dosage. A granular carbon with the best adsorption capacity was selected for continuous-flow operation in which non-ionic surfactants, COD and anionic surfactant alkyl benzene sulphonate were monitored. The breakthrough capacity for the non-ionic surfactants was in excess of 6000 bed volumes throughput of flocculated, sand-filtered effluent in a laboratory scale carbon column. Such a procedure is suggested for the complete removal of such pollutants from effluents.
Related Concept Videos
Factors Affecting Solubility
Detergent Purification of Membrane Proteins
Coagulation
Ion Exchange
Surface Active Agents
Biological Treatment of Effluent and Waste Water

