Related Experiment Video
Updated: Aug 15, 2026

Transformation of Probiotic Yeast and Their Recovery from Gastrointestinal Immune Tissues Following Oral Gavage in Mice
Published on: February 8, 2016
Disinfection of selected Aspergillus spp. using ultraviolet germicidal irradiation
Christopher F Green1, Pasquale V Scarpino, Paul Jensen
1Department of Civil and Environmental Engineering at the University of Cincinnati, OH 45221-0071, USA.
Aims:
The efficacy of ultraviolet germicidal irradiation (UVGI) and the UVGI dose necessary to inactivate fungal spores on an agar surface for cultures of Aspergillus flavus and Aspergillus fumigatus were determined.
Methods And Results:
A four-chambered UVGI testing unit with a 9-W, Phillips, low pressure, mercury UVGI lamp in each chamber was used in this study. An aperture was adjusted to provide 50, 100, 150, and 200 micro W/cm2 of uniform flux to the surfaces of the Petri dish, resulting in a total UVGI dose to the surface of the Petri dishes ranging from 12 to 96 mJ/cm2. The UVGI dose necessary to inactivate 90% of the A. flavus and A. fumigatus was 35 and 54 mJ/cm2, respectively.
Conclusions:
UVGI can be used to inactivate culturable fungal spores. Aspergillus flavus was more susceptible than A. fumigatus to UVGI.
Significance And Impact Of The Study:
These results may not be directly correlated to the effect of UVGI on airborne fungal spores, but they indicate that current technology may not be efficacious as a supplement to ventilation unless it can provide higher doses of UVGI to kill spores traveling through the irradiated zone.
Related Concept Videos
Hand hygiene
Hand washing...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Chemical Agents for Microbial Control

